JINYOU coordinates an outdoor kitchen cabinet material system using WPC/PVC composite board, an exterior PVDF decorative film, PUR lamination and matched edge treatment. A project reference used 18 x 1220 x 2440 mm boards and compared 0.60 and 0.80 g/cm³ samples. Final suitability depends on the approved construction and complete-system test results.
The board, weather-facing film, adhesive interface, edges, machined openings and hardware fixings can fail differently outdoors. They should be sampled and evaluated together for the actual climate and cabinet design.
1PVDF exterior film2PUR lamination layer3WPC/PVC composite core4Matched sealed edge5Hinge and screw fixing zoneJINYOU coordinates an outdoor kitchen cabinet material system using WPC/PVC composite board, an exterior PVDF decorative film, PUR lamination and matched edge treatment. A project reference used 18 x 1220 x 2440 mm boards and compared 0.60 and 0.80 g/cm³ samples. Final suitability depends on the approved construction and complete-system test results.
This page describes a configurable system under outdoor-cabinet evaluation. It does not promise a service life, complete waterproofing, warranty, named certification or test result. Request current material data and the report for the approved finished sample.
Send climate and installation location, cabinet drawings, board size and density target, film finish, exposed faces and edges, cut-outs, hardware, quantity, destination and required test method.
No. It is a configurable material system for project evaluation. Any certification or performance claim must match the approved finished construction and its evidence.
Outdoor failure may start at the film bond, edge, cut-out or fixing even when one component performs well. Evaluate the full board, film, PUR, edge and hardware assembly.
Yes. Send the climate, drawing, finish, board requirement, exposed edges and agreed test plan so the applicable sample can be confirmed.