01
Record the machine and glue system
Send the edge-bander model, glue-pot type, application roller condition and any current operating problem.
01-04
A four-step selection method
This sequence helps purchasing and production teams compare hot melt adhesive and hot melt adhesives without turning general catalog information into an unsupported production setting.
02
Define the production conditions
Record line speed, workshop temperature, start-stop pattern and the target production output.
03
Identify both bonding surfaces
Specify the board substrate and the edge material, including color or visible glue-line requirements.
04
Confirm documents and run a trial
Request the current grade-specific TDS/SDS, approve a sample and test it on the actual production line before mass production.
JINYOU 2026
Compare the six catalog families
The matrix is a shortlist, not a substitute for the current TDS/SDS or a line trial.
| Product family | Catalog model references | Catalog appearance |
|---|---|---|
| High-Temperature Edge Banding Hot Melt Adhesive | 3620, 3621, 3625, 3630, 3635, 3640, 3666 | Natural or pure white; selected paired grades may use an optional trace-free blend |
| Medium-Temperature Edge Banding Hot Melt Adhesive | 2620, 2621, 2625, 2630, 2635, 2640, 2666 | Natural or pure white; selected paired grades may use an optional trace-free blend |
| Low-Temperature Hot Melt Adhesive 1625 | 1625 | Natural or pure white |
| Trace-Free Translucent Hot Melt Adhesive | 5:1 | Yellow translucent or white translucent |
| Colored Edge Banding Hot Melt Adhesive | Color- and application-specific grade | Black, gray, red, yellow or brown |
| Modified Granular PUR Hot Melt Adhesive | 3666 / 2666 | Natural or pure white |
RFQ
Information to send with an RFQ
Send machine model, line speed, glue-pot condition, substrate, edge material, ambient temperature, quantity, destination and required documents.
Current documents
Request the current TDS, SDS, applicable batch QC information and any destination-specific document required for the selected grade.
Production validation
Run a sample trial with the actual substrate, edge material, machine settings and workshop conditions before mass production.
Request the current TDS, SDS, applicable batch QC information and any destination-specific document required for the selected grade.
Production validation
Run a sample trial with the actual substrate, edge material, machine settings and workshop conditions before mass production.
Specifications that require confirmation
Viscosity, open time, final operating range, compatibility, test results, certificates, price, MOQ, lead time and payment terms are not blanket catalog claims. Confirm them in writing for the selected grade and shipment.
The catalog is a product-comparison document. Request the current TDS/SDS and written model confirmation before ordering or setting production parameters.
JINYOU
Open the product family pages
High-Temperature Edge Banding Hot Melt Adhesive
The catalog's 3XXX group for buyers evaluating a high-temperature edge-banding hot melt family. Paired references run from 3620 to 3640, with 3666 listed as a special modified granular PUR reference.
View product page >
Medium-Temperature Edge Banding Hot Melt Adhesive
The catalog's 2XXX medium-temperature group, with paired references from 2620 to 2640 and special modified granular PUR reference 2666. Final operating settings depend on the selected grade and line trial.
View product page >
Low-Temperature Hot Melt Adhesive 1625
Model 1625 is presented as the catalog's low-temperature hot melt adhesive reference. Confirm the grade-specific TDS and validate it with the actual edge-banding line and materials.
View product page >
Trace-Free Translucent Hot Melt Adhesive
The catalog describes an optional 5:1 trace-free translucent blend in yellow-translucent and white-translucent appearances, with a catalog-recommended 130-180°C range. Confirm the exact paired grade and settings before use.
View product page >
Colored Edge Banding Hot Melt Adhesive
The catalog lists black, gray, red, yellow and brown colored hot melt options in medium- and high-temperature versions. Match the color and grade to the actual edge material and visible glue-line requirement.
View product page >
Modified Granular PUR Hot Melt Adhesive
The catalog identifies 3666 as the high-temperature and 2666 as the medium-temperature modified granular PUR references. Treat these as model identifiers and request the current grade-specific TDS/SDS and application confirmation.
View product page >FAQ
Selection FAQ
Is the 3XXX high-temperature family always the best choice?
No. A higher temperature label does not automatically mean a better fit. Machine design, line speed, glue condition, materials, environment and the required result determine which family should be tested.
Can the catalog values be used as final production settings?
No. Catalog information is for comparison. Use the current grade-specific TDS/SDS and verify settings with a production trial.
What information is needed for a quotation and sample?
Send machine model, line speed, glue-pot condition, substrate, edge material, ambient temperature, quantity, destination and required documents.