Aplicaciones principales
- 3D membrane pressed cabinet doors
- Thermoformed furniture doors
- Shaped MDF or WPC door surfaces
- Sample approval for molded door panels
Detalles de producto
PU Membrane Press Adhesive
Envie aplicacion, sustrato, acabado, medidas, cantidad, puerto de destino, solicitud de muestra y requisitos de informe antes de comparar precios.
Opciones disponibles
- PU membrane press adhesive request
- 3D film and substrate matching
- Process testing before bulk order
Materiales compatibles
- MDF
- WPC
- PVC foam board where suitable
- Profiled cabinet door blanks
Control de calidad e informes
Process proof: confirm substrate, film, machine speed, coating amount, open time, working temperature and adhesion test before bulk order.
Datos para cotizacion
Control de calidad e informes
Film material3D thermoforming or membrane film by project.
SubstrateProfiled MDF, WPC or project-confirmed door blank.
Application processMembrane pressing only. Contact JINYOU for technical data and application testing.
Recommended testingCorner adhesion, recessed profile adhesion, surface check and post-press sample approval.
Detalle del producto
PU Membrane Press Adhesive proveedor China para muebles, interiores y proyectos B2B
Definición y guía de compra. Adhesive selection is application-specific. The same grade should not be assumed suitable for every film, board, machine, line speed or climate.
PU Membrane Press Adhesive proveedor China para muebles, interiores y proyectos B2B is presented as a distinct purchasing family rather than a generic category label.
Adhesive selection is application-specific. The same grade should not be assumed suitable for every film, board, machine, line speed or climate.
Send substrate and film types, machine and glue system, line speed, temperatures, coating weight, workshop conditions and required bond performance.
JINYOU will map the request to the suitable current product, owned-production or partner-manufacturing source as applicable, then confirm samples, documents and commercial terms before order.
Product familyPU Membrane Press Adhesive proveedor China para muebles, interiores y proyectos B2B
Primary selection basisAdhesive selection is application-specific. The same grade should not be assumed suitable for every film, board, machine, line speed or climate.
Buyer inputSend substrate and film types, machine and glue system, line speed, temperatures, coating weight, workshop conditions and required bond performance.
Confirmation ruleFinal specifications, production source, availability, compliance evidence and commercial terms require written confirmation.
Flujo típico de producción y control
Step 1Application mappingRecord substrate, surface energy, film or edge material, machine, speed and environmental conditions.
Step 2Grade and sample selectionSelect a current grade using the latest TDS/SDS and a controlled trial quantity.
Step 3Production and packingCoordinate formulation, reaction or blending, filtration and moisture-protected packing for the confirmed grade.
Step 4Line validationCheck coating, open time, initial tack, appearance, heat or moisture performance on the buyer's actual line.
This is a typical process and supply-control sequence, not a claim that every product is made on one JINYOU-owned line. Exact procedures and evidence depend on the confirmed factory, grade and order.
Datos para cotizar
- Exact product or grade and end-use
- Dimensions, thickness, color, finish or formulation role
- Machine, process and operating conditions
- Target performance and approval sample
- Required TDS, SDS, COA or destination evidence
- Quantity, packing, labeling and destination
- Incoterm, target schedule and trial request
- Photos, drawings or current reference sample